Conservation of snow — the practice of preserving snow masses for subsequent use during the warm period of the year — has evolved from local household tricks to an engineering discipline closely related to issues of sustainable development, water resources, and adaptation to climate change. Modern approaches combine proven traditional methods with high technologies, placing environmental efficiency and energy autonomy at the forefront.
Historically, the conservation of snow relied on passive methods using the natural properties of materials and terrain:
Snowmen and artificial glaciers: In the Alps, Caucasus, and Himalayas, for the purpose of ensuring summer water supply and irrigation of pastures, the accelerated accumulation of snow in natural niches was practiced using snow-retaining shields and retaining walls. Snow was compacted to reduce melting, and covered with a layer of wood shavings, straw, or sawdust. These materials create a thermal insulating layer with low thermal conductivity and high albedo, reflecting solar radiation. For example, in the Swiss Alps, this method allows for the preservation of up to 70% of the snow mass until the middle of summer.
Persian ice stores ("yakshchal"): Genius constructions of ancient times, predecessors of modern glaciers. These were dome-shaped earthen constructions with thick walls and a system of underground channels (tubes). In winter, ice and snow were placed in them, and in summer, thanks to passive ventilation and insulation, cold water was obtained. This is an example of the use of thermal inertia of the ground and the principle of evaporative cooling.
Modern conservation focuses on reducing energy consumption, using renewable resources, and minimizing the ecological footprint.
Geotextile coverings (white woven fabrics): This is the main industrial tool today. Special fabrics made of polypropylene or polyester with UV stabilization have:
High albedo (up to 90%), reflecting solar radiation.
Low thermal conductivity, creating a barrier for heat.
Hydrophobicity, allowing melted water to run off rather than absorb.
They are used to cover prepared snow mounds at ski resorts (for example, on the Hintertux Glacier in Austria or at "Rosa Khutor" in Sochi), which allows for the preservation of up to 80% of the snow mass for the early start of the next season, significantly reducing the need for energy-intensive artificial snowmaking.
Phase-change materials (PCM — Phase Change Materials): An innovative direction. Coatings or mats containing microcapsules with substances that change their state of aggregation at a temperature of about 0°C (for example, paraffins, salts hydrates) are being developed. Absorbing heat during the day for melting, they do not allow the temperature under the covering to rise above the melting point of snow, actively "damping" thermal peaks.
Biodegradable covering materials: In response to the problem of microplastics (fibers from geotextiles), developments of coatings based on cornstarch, polylactic acid (PLA), or treated natural cellulose are being carried out. Their key challenge is to maintain strength and reflective properties throughout the entire summer season, after which the material must decompose safely.
The conservation of snow goes beyond recreation, becoming a tool for climate adaptation.
Snow dams and artificial glaciers: In arid high-altitude regions (for example, Ladakh in India), engineer Chewang Norphel popularized the technology of creating "artificial ice step" (Ice Stupa). These are conical ice structures formed by freezing water drop by drop in winter. Their shape minimizes the area exposed to melting, ensuring a slow supply of water for irrigation during the critically dry spring period. This is an example of passive hydraulic engineering using the cold winter air as a resource.
Water resource management: In Scandinavia and Canada, projects for the creation of large-scale snow storage near hydroelectric power stations are being studied. Excess winter snow is planned to be collected, compacted, and covered, so that during the summer low-water period, when the water level falls, melted water can be used to maintain power generation, reducing the carbon footprint.
Urban microclimate regulation: Pilot projects in megacities (for example, Tokyo) study the possibility of using conserved snow for passive cooling of buildings in summer. Snow stored in isolated underground bunkers can cool air or water through a heat exchange system for air conditioning systems, reducing electricity consumption.
Despite the potential benefits, the technology has a downside:
Production of synthetic geotextile — an energy-intensive process associated with the use of fossil raw materials.
Migration of microfibers into soil and water bodies.
Disruption of natural ecological processes in places of long-term snow storage (change in humidity, temperature, vegetation).
Therefore, advanced research is aimed at creating a full life cycle of technology — from the production of biodegradable coverings to the recycling of used materials and integration of snow storage facilities into natural landscapes with minimal interference.
The conservation of snow has transformed from a craft into an interdisciplinary science at the intersection of cryology, materials science, hydrology, and sustainable engineering. Its goal is not just to preserve snow for entertainment, but to rationalize water resources, mitigate the consequences of droughts, and reduce energy consumption, using winter cold as a renewable natural capital. The future of the direction lies in the development of "smart" composite coatings, integration with renewable energy systems (for example, using excess solar panel energy to power refrigeration units during peak melting periods), and creating scalable solutions for vulnerable arid regions. Thus, snow conserved according to environmental principles becomes not an anachronism, but a strategic resource for a sustainable future in the face of changing climate.
New publications: |
Popular with readers: |
News from other countries: |
![]() |
Editorial Contacts |
About · News · For Advertisers |
British Digital Library ® All rights reserved.
2023-2026, ELIBRARY.ORG.UK is a part of Libmonster, international library network (open map) Keeping the heritage of the Great Britain |
US-Great Britain
Sweden
Serbia
Russia
Belarus
Ukraine
Kazakhstan
Moldova
Tajikistan
Estonia
Russia-2
Belarus-2